- Radiation Basics
- Radiation and Health Fact Sheets
- Electricity and Health
- Electromagnetic Radiation (EMR) Literature Survey
- Mobile Phones and Health
- Mobile Phone Base Station Survey 2007 - 13
- ARPANSA Environmental EME Reports
- Reporting a Health or Safety Concern
- Radiation Protection Websites
- Radiation Emergencies
- Australian Radiation Incident Register
- Electromagnetic Radiation Health Complaints Register
- Survey of Residential Power Frequency Magnetic Fields
- Australian Solaria Regulation and Operator Training
- Radiation Protection of the Patient
For more information please get in touch with ARPANSA
- Phone Number+61 3 9433 2211
- Fax Number+61 3 9432 1835
- email ARPANSA
Radon Map of Australia
ARPANSA has prepared an updated interactive radon map of Australia that shows the average indoor radon levels for each census district.
1990 Australian Radon Survey
Inhalation of the naturally occurring radioactive gas radon and its progeny can be a health concern. In 1990, the Australian Radiation Protection and Nuclear Safety Agency conducted a nationwide survey of more than 3300 Australian homes to determine the radiation dose to the Australian population from exposure to natural background radiation, including radon. Based on this survey, the average concentration of radon in Australian homes is about 10 Bq m⁻³. This is less than in many other countries and compares to a global average indoor value of 40 Bq m⁻³. Average radon levels in Australian homes are only a little larger than the radon levels in outside air and are of minimal concern to the health.
Updated radon map for Australia
The survey found a very wide range of radon levels across Australia. The results have been previously reported in the form of a radon map based on postcode districts. This map has now been updated to provide district averages radon based on the SA2 regions from the 2011 census.
This new interactive radon map displays interpolated values in census districts, for typical Australian homes. While factors such as house type, construction materials and ventilation can affect the radon levels, the effect of these factors is small relative to effects due to the local geology and soil type. Taking account of the house type, the actual radon levels in a particular home may be up to a factor of two different for that shown on the map.
The radon map shows that average radon levels in homes along the Great Dividing Range are typically higher that levels in homes on the coastal plan, mainly due to differences in the nature of the underlying geology (rock and soil).
View larger map
How to use the interactive map
Use your mouse cursor to zoom in on the area you would like to view, then left click on the region to show a pop-up box with the average radon level (see example). Alternatively, use the search bar in the top right corner to directly search for an address or region.
The information provided in the interactive map can also be accessed via the CSV file below. Search and locate a suburb to find the average radon level.
What does this mean for my family
Although the typical radon levels in Australia are low, the values on the map are the average values for each census district. For a particular house in a specific location factors such as the local geology and house type could lead to different values. If you are concerned about the radon levels in your home it is easy to have it tested. Radon monitors are available at low cost from ARPANSA.
- Radon Exposure and Health
- Radon monitors for purchase
Adobe Acrobat Reader is needed to view PDF files
The free Adobe Acrobat Reader is available from Adobe's website