An ARPANSA Protection Factor Report for films, glass and other materials contain the following results:
•	The company the report was prepared for
•	The sample and colour  as described by the supplier
•	The analysis date and on what instrument the test was performed  on
•	A generic description, such as Clear Polyethylene Film, 0.15mm 
•	Mean UVA Transmission: The average UVA (315 to 400 nm) radiation passing through the film.
•	Mean UVB Transmission: The average UVB (290 to 315 nm) radiation passing through the film.
•	Protection Factor (PF):  The protection factor (PF) is calculated by comparing the photo-biologically effective irradiance without and with the test material in place for each sample and then averaged for the number of specimens analysed.
•	Standard Deviation: This indicates how much variation in PF rating there is across the surface of the material.
•	Calculated PF: The mean PF minus the standard deviation.
•	Number of Specimens Analysed: This shows how many measurements were made on the material.
•	Ultraviolet Radiation Blocked: The percentage photo-biologically effective UVR blocked by the material.
•	Material Sample: For positive identification, a sample of the material tested, or an image of the product, is attached to the report.
•	Transmission Characteristics: The graph shows the average of the measured transmissions.