If you require more information on an inspection report or the inspection process in general, please direct your enquiry to licenceadmin@arpansa.gov.au.
For reports on inspections conducted prior to 2017-18, see Inspection reports archive.
Inspection report summaries
Inspection of: F0300, Department of Defence and Australian Defence Force
Location: NSW
Date: February 2025
Scope of Inspection: Facility Performance Objectives and Criteria (FPOCs)
Inspection findings: The inspection found generally satisfactory management of safety and security.
One non-compliance was identified. This related to licensing requirements. ARPANSA will monitor to ensure that corrective actions are implemented so that controlled activities are returned to compliance.
Four Areas for Improvement (AFIs) were found where the licence holder did not meet best practice or a self-imposed standard, but which were considered not to reach the threshold of a non-compliance. These related to: review and update of documentation; record keeping; equipment calibration; and warning signage. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
Inspection of: S0202, Australian Nuclear Science and Technology Organisation
Location: NSW
Date: March 2025
Scope of Inspection: Source Performance Objectives and Criteria (SPOCs)
Inspection findings: The inspection found generally satisfactory management of safety and security.
No non-compliances were identified.
One Area for Improvement (AFI) was found where the licence holder did not meet best practice or a self-imposed standard, but which was considered not to reach the threshold of a non-compliance. This related to record keeping. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
Inspection of: F0309, Australian Nuclear Science and Technology Organisation
Location: NSW
Date: March and April 2025
Scope of Inspection: Facility Performance Objectives and Criteria (FPOCs) 3, 4, 5 and 8
Inspection findings: The inspection found generally satisfactory management of safety and security.
No non-compliances were identified.
Four Areas for Improvement (AFIs) were found where the licence holder did not meet best practice or a self-imposed standard, but which were considered not to reach the threshold of a non-compliance. These related to: warning signage/lights; testing of reusable PPE; review and update of procedures; and use of referenceable data in risk assessments. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
Inspection of: F0260, Australian Nuclear Science and Technology Organisation
Location: NSW
Date: March 2025
Scope of Inspection: Facility Performance Objectives and Criteria (FPOCs) 2, 3, 6 and 7
Inspection findings: The inspection found generally satisfactory management of safety and security.
No non-compliances were identified.
Two Areas for Improvement (AFIs) were found where the licence holder did not meet best practice or a self-imposed standard, but which were considered not to reach the threshold of a non-compliance. These related to record keeping, and review and update of procedures. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
One good practice was noted in the development of a site wide asset management system.
Inspection of: S0080, Australian War Memorial
Location: ACT
Date: March 2025
Scope of Inspection: Source Performance Objectives and Criteria (SPOCs)
Inspection findings: The inspection found generally satisfactory management of safety and security.
No non-compliances were identified.
Two Areas for Improvement (AFIs) were found where the licence holder did not meet best practice or a self-imposed standard, but which were considered not to reach the threshold of a non-compliance. These related to record keeping, and warning signage. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
Inspection of: F0157, Australian Nuclear Science and Technology Organisation
Location: NSW
Date: March and April 2025
Scope of Inspection: Facility Performance Objectives and Criteria (FPOCs) 3 and 7
Inspection findings: The inspection found generally satisfactory management of safety and security.
No non-compliances were identified.
Six Areas for Improvement (AFIs) were found where the licence holder did not meet best practice or a self-imposed standard, but which were considered not to reach the threshold of a non-compliance. These related to: clarification of the roles and responsibilities of key personnel; change management processes; tracking of improvement actions; review and update of procedures; record keeping; and training records. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
Inspection of: S0027, Australian National University
Location: ACT
Date: March 2025
Scope of Inspection: Source Performance Objectives and Criteria (SPOCs)
Inspection findings: The inspection found generally satisfactory management of safety and security.
No non-compliances were identified.
No Areas for Improvement (AFIs) were found where the licence holder did not meet best practice or a self-imposed standard, but which were considered not to reach the threshold of a non-compliance. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
One good practice was noted in the development of QR codes for incident reporting.
Inspection of: S0042, Department of Defence and Australian Defence Force
Location: SA
Date: May 2025
Scope of Inspection: Source Performance Objectives and Criteria (SPOCs)
Inspection findings: The inspection found generally satisfactory management of safety and security.
No non-compliances were identified.
One Area for Improvement (AFI) was found where the licence holder did not meet best practice or a self-imposed standard, but which was considered not to reach the threshold of a non-compliance. This related to record keeping. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
Inspection of: S0042, Department of Defence and Australian Defence Force
Location: SA
Date: May 2025
Scope of Inspection: Source Performance Objectives and Criteria (SPOCs)
Inspection findings: The inspection found generally satisfactory management of safety and security.
No non-compliances were identified.
Two Areas for Improvement (AFIs) were found where the licence holder did not meet best practice or a self-imposed standard, but which were considered not to reach the threshold of a non-compliance. These related to review and update of documentation, and record keeping. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
Inspection of: F0136, Department of Home Affairs
Location: QLD
Date: May 2025
Scope of Inspection: Facility Performance Objectives and Criteria (FPOCs)
Inspection findings: The inspection found generally satisfactory management of safety and security.
No non-compliances were identified.
Three Areas for Improvement (AFIs) were found where the licence holder did not meet best practice or a self-imposed standard, but which were considered not to reach the threshold of a non-compliance. These related to: review and maintenance of documentation; preparation of a decommissioning plan; and update of procedure documentation. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
Inspection of: S0042, Department of Defence and Australian Defence Force
Location: QLD
Date: June 2025
Scope of Inspection: Source Performance Objectives and Criteria (SPOCs)
Inspection findings: The inspection found generally satisfactory management of safety and security.
No non-compliances were identified.
Three Areas for Improvement (AFIs) were found where the licence holder did not meet best practice or a self-imposed standard, but which were considered not to reach the threshold of a non-compliance. These related to: record keeping; testing of reusable PPE; and maintenance of dose records. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
Inspection of: F0211, Australian Nuclear Science and Technology Organisation
Location: NSW
Date: June 2025
Scope of Inspection: Facility Performance Objectives and Criteria (FPOCs)
Inspection findings: The inspection found generally satisfactory management of safety and security.
No non-compliances were identified.
No Areas for Improvement (AFIs) were found where the licence holder did not meet best practice or a self-imposed standard, but which were considered not to reach the threshold of a non-compliance. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
Inspection of: F0262, Australian Nuclear Science and Technology Organisation
Location: NSW
Date: June and July 2025
Scope of Inspection: Facility Performance Objectives and Criteria (FPOCs) 3, 4, 5 and 8
Inspection findings: The inspection found generally satisfactory management of safety and security.
No non-compliances were identified.
Seven Areas for Improvement (AFIs) were found where the licence holder did not meet best practice or a self-imposed standard, but which were considered not to reach the threshold of a non-compliance. These related to: procedures for alarms; implementation of procedures; oversight of assets management; identification and visibility of specific controls; design and evaluation of testing requirements; strengthening oversight; and decommissioning planning. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
Inspection of: S0335, Australian Signals Directorate
Location: ACT
Date: June 2025
Scope of Inspection: Source Performance Objectives and Criteria (SPOCs)
Inspection findings: The inspection found generally satisfactory management of safety and security.
One non-compliance was identified. This related to maintaining an accurate source inventory. ARPANSA will monitor to ensure that corrective actions are implemented so that controlled activities are returned to compliance.
Five Areas for Improvement (AFIs) were found where the licence holder did not meet best practice or a self-imposed standard, but which were considered not to reach the threshold of a non-compliance. These related to: references to codes and/or standards; clarification of the roles and responsibilities of key personnel; review and update of procedures; specification of dose constraints for occupationally exposed persons; and availability of relevant contact details. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
Inspection of: S0064, Commonwealth Scientific and Industrial Research Organisation
Location: ACT
Date: June 2025
Scope of Inspection: Source Performance Objectives and Criteria (SPOCs)
Inspection findings: The inspection found generally satisfactory management of safety and security.
One non-compliance was identified. This related to complying with the requirements of a relevant code or standard AS/NZS 2243.4. ARPANSA will monitor to ensure that corrective actions are implemented so that controlled activities are returned to compliance.
Two Areas for Improvement (AFIs) were found where the licence holder did not meet best practice or a self-imposed standard, but which were considered not to reach the threshold of a non-compliance. These related to availability of a spill kit, and review and maintenance of documentation. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
Inspection of: S0310, Federal Court of Australia
Location: QLD
Date: July 2025
Scope of Inspection: Source Performance Objectives and Criteria (SPOCs)
Inspection findings: The inspection found generally satisfactory management of safety and security.
No non-compliances were identified.
Five Areas for Improvement (AFIs) were found where the licence holder did not meet best practice or a self-imposed standard, but which were considered not to reach the threshold of a non-compliance. These related to: record keeping; warning signage; equipment barriers; operator location; and update of procedure documentation. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
Inspection of: F0290, Australian Nuclear Science and Technology Organisation
Location: NSW
Date: July 2025
Scope of Inspection: Facility Performance Objectives and Criteria (FPOCs) 1, 2, 3, 6 and 7
Inspection findings: The inspection found generally satisfactory management of safety and security.
No non-compliances were identified.
Four Areas for Improvement (AFIs) were found where the licence holder did not meet best practice or a self-imposed standard, but which were considered not to reach the threshold of a non-compliance. These related to: consideration of human factors; clarification of the roles and responsibilities of key personnel; review and update of maintenance procedures; and submission of documentation. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
Inspection of: F0260, Australian Nuclear Science and Technology Organisation
Location: NSW
Date: August and September 2025
Scope of Inspection: Reactive inspection
Inspection findings: Four non-compliances were identified. These related to: review and maintenance of documentation; following approvals procedures; change management; and seeking approval to make a change. ARPANSA will monitor to ensure that corrective actions are implemented so that controlled activities are returned to compliance.
Inspection of: F0344, Australian Nuclear Science and Technology Organisation
Location: NSW
Date: August 2025
Scope of Inspection: Facility Performance Objectives and Criteria (FPOCs)
Inspection findings: The inspection found generally satisfactory management of safety and security.
No non-compliances were identified.
One Area for Improvement (AFI) was found where the licence holder did not meet best practice or a self-imposed standard, but which was considered not to reach the threshold of a non-compliance. This related to record keeping. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
Inspection of: S0190, ASC Pty Ltd
Location: SA
Date: August 2025
Scope of Inspection: Source Performance Objectives and Criteria (SPOCs)
Inspection findings: The inspection found generally satisfactory management of safety and security.
No non-compliances were identified.
Four Areas for Improvement (AFIs) were found where the licence holder did not meet best practice or a self-imposed standard, but which were considered not to reach the threshold of a non-compliance. These related to: references to codes and/or standards; specification of dose constraints for occupationally exposed persons; exclusion zone markings; and warning signage. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
Inspection of: F0247, Australian Nuclear Science and Technology Organisation
Location: NSW
Date: September and October 2025
Scope of Inspection: Facility Performance Objectives and Criteria (FPOCs)
Inspection findings: One non-compliance was identified. This related to taking all reasonably practicable steps to manage safety. An improvement notice was issued. ARPANSA will monitor to ensure that corrective actions are implemented so that controlled activities are returned to compliance.
Inspection of: S0013, Commonwealth Scientific and Industrial Research Organisation
Location: SA
Date: September 2025
Scope of Inspection: Source Performance Objectives and Criteria (SPOCs)
Inspection findings: The inspection found generally satisfactory management of safety and security.
No non-compliances were identified.
Two Areas for Improvement (AFIs) were found where the licence holder did not meet best practice or a self-imposed standard, but which were considered not to reach the threshold of a non-compliance. These related to change management processes, and use of appropriate terminology. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
Inspection of: F0213, Department of Defence and Australian Defence Force
Location: SA
Date: September 2025
Scope of Inspection: Facility Performance Objectives and Criteria (FPOCs)
Inspection findings: The inspection found generally satisfactory management of safety and security.
No non-compliances were identified.
Two Areas for Improvement (AFIs) were found where the licence holder did not meet best practice or a self-imposed standard, but which were considered not to reach the threshold of a non-compliance. These related to review and update of documentation, and conducting exercises. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
Inspection of: F0248, Australian Nuclear Science and Technology Organisation
Location: NSW
Date: September and October 2025
Scope of Inspection: Facility Performance Objectives and Criteria (FPOCs)
Inspection findings: The inspection found generally satisfactory management of safety and security.
No non-compliances were identified.
One Area for Improvement (AFI) was found where the licence holder did not meet best practice or a self-imposed standard, but which was considered not to reach the threshold of a non-compliance. This related to preparation of decommissioning plans. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
Inspection of: S0077, National Museum of Australia
Location: ACT
Date: September 2025
Scope of Inspection: Source Performance Objectives and Criteria (SPOCs)
Inspection findings: The inspection found generally satisfactory management of safety and security.
One non-compliance was identified. This related to review and update of documentation. ARPANSA will monitor to ensure that corrective actions are implemented so that controlled activities are returned to compliance.
Four Areas for Improvement (AFIs) were found where the licence holder did not meet best practice or a self-imposed standard, but which were considered not to reach the threshold of a non-compliance. These related to: training requirements; references to codes and/or standards; specification of dose constraints; and review and update of documentation. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
Inspection of: F0131, Department of Home Affairs
Location: VIC
Date: October 2025
Scope of Inspection: Facility Performance Objectives and Criteria (FPOCs)
Inspection findings: The inspection found generally satisfactory management of safety and security.
No non-compliances were identified.
One Area for Improvement (AFI) was found where the licence holder did not meet best practice or a self-imposed standard, but which was considered not to reach the threshold of a non-compliance. This related to warning signage. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
Inspection of: F0046, Australian Radiation Protection and Nuclear Safety Agency
Location: VIC
Date: October 2025
Scope of Inspection: Facility Performance Objectives and Criteria (FPOCs)
Inspection findings: The inspection found generally satisfactory management of safety and security.
Two non-compliances were identified. These related to following the plans and arrangements for managing safety, and conducting exercises. ARPANSA will monitor to ensure that corrective actions are implemented so that controlled activities are returned to compliance.
Six Areas for Improvement were found where the licence holder did not meet best practice or a self-imposed standard, but which were considered not to reach the threshold of a non-compliance. These related to: review and maintenance of documentation; clarification of the roles and responsibilities of key personnel; sensitivity analysis; tracking of improvement actions; review and update of procedures; and review and update of relevant documents. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
Inspection of: S0092, Department of Home Affairs
Location: WA (CX)
Date: October 2025
Scope of Inspection: Source Performance Objectives and Criteria (SPOCs)
Inspection findings: The inspection found generally satisfactory management of safety and security.
No non-compliances were identified.
No Areas for Improvement (AFIs) were found where the licence holder did not meet best practice or a self-imposed standard, but which were considered not to reach the threshold of a non-compliance. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
Inspection of: S0229, Department of Infrastructure Transport Regional Development and Communications
Location: WA (CX and CC)
Date: October 2025
Scope of Inspection: Source Performance Objectives and Criteria (SPOCs)
Inspection findings: The inspection found generally satisfactory management of safety and security.
No non-compliances were identified.
Four Areas for Improvement (AFIs) were found where the licence holder did not meet best practice or a self-imposed standard, but which were considered not to reach the threshold of a non-compliance. These related to: equipment testing; record keeping; specification of dose constraints for occupationally exposed persons; and storage of monitoring devices. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
Inspection of: S0288, Department of Infrastructure Transport Regional Development and Communications
Location: WA (CX and CC)
Date: October 2025
Scope of Inspection: Source Performance Objectives and Criteria (SPOCs)
Inspection findings: The inspection found generally satisfactory management of safety and security.
No non-compliances were identified.
No Areas for Improvement (AFIs) were found where the licence holder did not meet best practice or a self-imposed standard, but which were considered not to reach the threshold of a non-compliance. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
Inspection of: F0157, Australian Nuclear Science and Technology Organisation
Location: NSW
Date: November 2025
Scope of Inspection: Facility Performance Objectives and Criteria (FPOCs) 4, 5, 6, and 8
Inspection findings: The inspection found generally satisfactory management of safety and security.
No non-compliances were identified.
Four Area(s) for Improvement (AFIs) were found where the licence holder did not meet best practice or a self-imposed standard, but which were considered not to reach the threshold of a non-compliance. These related to: record keeping; process review and updates; management of updates to controlled documents; and providing results of environmental monitoring. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
Inspection of: F0243, Australian Nuclear Science and Technology Organisation
Location: NSW
Date: November 2025
Scope of Inspection: Facility Performance Objectives and Criteria (FPOCs)
Inspection findings: The inspection found generally satisfactory management of safety and security.
Two non-compliances were identified. These related to seeking approval to make a change, and exercising response arrangements. ARPANSA will monitor to ensure that corrective actions are implemented so that controlled activities are returned to compliance.
Four Areas for Improvement (AFIs) were found where the licence holder did not meet best practice or a self-imposed standard, but which were considered not to reach the threshold of a non-compliance. These related to: maintenance of documentation; consideration of human factors; update of routine procedures; and exercising response arrangements. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
Inspection of: F0266, Australian Nuclear Science and Technology Organisation
Location: NSW
Date: December 2025
Scope of Inspection: Facility Performance Objectives and Criteria (FPOCs)
Inspection findings: The inspection found generally satisfactory management of safety and security.
No non-compliances were identified.
One Area for Improvement (AFI) was found where the licence holder did not meet best practice or a self-imposed standard, but which was considered not to reach the threshold of a non-compliance. This related to review and maintenance of documentation. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
Inspection of: F0125, Department of Home Affairs
Location: NSW
Date: December 2025
Scope of Inspection: Facility Performance Objectives and Criteria (FPOCs)
Inspection findings: The inspection found generally satisfactory management of safety and security.
No non-compliances were identified.
One Area for Improvement (AFI) was found where the licence holder did not meet best practice or a self-imposed standard, but which was considered not to reach the threshold of a non-compliance. This related to review and maintenance of documentation. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
Inspection of: S0066, Commonwealth Scientific and Industrial Research Organisation
Location: VIC
Date: February 2026
Scope of Inspection: Source Performance Objectives and Criteria (SPOCs)
Inspection findings: The inspection found generally satisfactory management of safety and security.
No non-compliances were identified.
Two Areas for Improvement (AFIs) were found where the licence holder did not meet best practice or a self-imposed standard, but which were considered not to reach the threshold of a non-compliance. These related to review and maintenance of documentation, and references to codes and/or standards. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
Inspection of: S0216, Commonwealth Scientific and Industrial Research Organisation
Location: VIC
Date: February 2026
Scope of Inspection: Source Performance Objectives and Criteria (SPOCs)
Inspection findings: The inspection found generally satisfactory management of safety and security.
No non-compliances were identified.
Two Areas for Improvement (AFIs) were found where the licence holder did not meet best practice or a self-imposed standard, but which were considered not to reach the threshold of a non-compliance. These related to review and maintenance of documentation, and clarification of the roles and responsibilities of key personnel. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
Inspection of: F0271, Australian Nuclear Science and Technology Organisation
Location: VIC
Date: February and March 2026
Scope of Inspection: Facility Performance Objectives and Criteria (FPOCs)
Inspection findings: The inspection found generally satisfactory management of safety and security.
No non-compliances were identified.
Three Areas for Improvement (AFIs) were found where the licence holder did not meet best practice or a self-imposed standard, but which were considered not to reach the threshold of a non-compliance. These related to: role-based competency requirements; accessing records; and review and maintenance of documentation. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
Inspection of: F0309, Australian Nuclear Science and Technology Organisation
Location: NSW
Date: March 2026
Scope of Inspection: Facility Performance Objectives and Criteria (FPOCs) 1, 2 and 7
Inspection findings: The inspection found generally satisfactory management of safety and security.
No non-compliances were identified.
Two Areas for Improvement (AFIs) were found where the licence holder did not meet best practice or a self-imposed standard, but which were considered not to reach the threshold of a non-compliance. These related to review and maintenance of documentation, and update of risk assessments. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
Inspection of: S0027, Australian National University
Location: ACT
Date: March 2026
Scope of Inspection: Source Performance Objectives and Criteria (SPOCs)
Inspection findings: The inspection found generally satisfactory management of safety and security.
No non-compliances were identified.
Five Areas for Improvement (AFIs) were found where the licence holder did not meet best practice or a self-imposed standard, but which were considered not to reach the threshold of a non-compliance. These related to: review and maintenance of documentation; record keeping; following measurement procedures; review and update of documentation; and complying with AS/NZS 2243.4. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
Inspection of: S0055, Department of Climate Change, Energy, the Environment and Water
Location: TAS
Date: April 2026
Scope of Inspection: Source Performance Objectives and Criteria (SPOCs)
Inspection findings: The inspection found generally satisfactory management of safety and security.
No non-compliances were identified.
Five Areas for Improvement (AFIs) were found where the licence holder did not meet best practice or a self-imposed standard, but which were considered not to reach the threshold of a non-compliance. These related to: references to codes and/or standards; warning signage; monitoring equipment calibration; establishment of a radiation safety committee; and review and maintenance of documentation. Improvement actions for AFIs are voluntarily applied by licence holders. Outstanding AFIs can impact future regulatory decisions and interventions.
